Epoxy Resin is the modern laboratory worktop material that offers a superb combination of features and benefits. It is durable, extremely chemical and stain resistant, mechanically strong, easily cleaned and decontaminated and exhibits good fire resistance, fire propagation and low smoke properties. Simmons mould components in solid Epoxy Resin material that cannot delaminate and has the same properties throughout its entire thickness. Epoxy Resin is moulded into a wide range of components of different sizes to cater for the most exacting of laboratory specifications, and is available in a range of subtle and aesthetically pleasing colours. These material qualities are supplemented by more than 30 years of experience of accurately casting and fabricating Epoxy Resin in Simmons Coventry factory using programmable saws and CNC Routers to ensure dimensional accuracy. The Simmons range consists of Worktops (Benchtops), Edgings (Lippings), Sinks, Sinktops and Fume Cupboard Bases. Drop-on sinks are designed to be easily fitted to any type of worktop material. They have self-rimming flanges which will conceal the core layer of a laminated worktop. The sink is self-supporting on its integral flange and can be bonded in place with silicone sealant or Epoxy Resin grout. The same raised flange has a smooth 45 face to the outside that will allow the user to wash liquids over it but prevent accidental spillage of materials into the sink. The base of the sink slopes to a hole rebated to accept a waste fitting. Sinks can also be drilled to accept an overflow fitting. Simmons can supply sinks complete with a polypropylene waste and overflow if requested.